Practical ideas for Revit, BIM and construction technology. Built from years of shared experience.
Typically when editing Revit families, if you want to deal with arrays and stop them breaking when the count is 1, you set up some IF() formulas in Revit. However, a recent comment by David over on Re…
Read the whole post:RevitCat: Revit Repeater Instance Parameters…
Check it out: RevitCat: Revit Repeaters Index Page…
I have posted about Profiles and Adaptive components before, but more recently Tim Waldock put together a nice, detailed post on the subject over at this link. In the post, he states: You can host it …
In the past, whenever you built a parametric array in a family, you needed to handle the “break” condition – that is, if the array value drops to 1, you need an IF formula to actually keep it as 2, hi…
After spending some time trying to make a workable, geometrically driven random reactor, I decided that it was far easier to use dp Stuff Randomizer (get 2014 version for free from here or older 2013 …
After reviewing Andy’s and Tim’s recent posts surrounding trees and reaction, I would like to contribute this little idea. Its a very simple setup – just a 2pt Adaptive with an “extension” (created by…