Two Ways to Access Instance Parameters of a Revit Repeater (from RevitCat)
Read the whole post:RevitCat: Revit Repeater Instance Parameters…
divide and repeat
Practical ideas for Revit, BIM and construction technology. Built from years of shared experience.
Revit Repeater Resources (Divide and Repeat)
Check it out: RevitCat: Revit Repeaters Index Page…
Profiles in Adaptive Components, with Repeaters
I have posted about Profiles and Adaptive components before, but more recently Tim Waldock put together a nice, detailed post on the subject over at this link. In the post, he states: You can host it …
Why a Repeated component on a Divided Line Path is better than an Array
In the past, whenever you built a parametric array in a family, you needed to handle the “break” condition – that is, if the array value drops to 1, you need an IF formula to actually keep it as 2, hi…
Random Tree Heights and Locations in Revit – make a forest in just a few clicks
After spending some time trying to make a workable, geometrically driven random reactor, I decided that it was far easier to use dp Stuff Randomizer (get 2014 version for free from here or older 2013 …
My Reactor Treetop
After reviewing Andy’s and Tim’s recent posts surrounding trees and reaction, I would like to contribute this little idea. Its a very simple setup – just a 2pt Adaptive with an “extension” (created by…
Can't see Repeat Button when using Divide and Repeat?
Try this: Make sure that you are using the Face option for placing the component.Turn off the Original Path by selecting the Divided Path and using: Start the place Component command.Make sure that yo…
Using Divide and Repeat for Site Masterplanning
You will find below a visual diary of some site master planning options – the Divide and Repeat tool was used to layout out the units. Here is a very concise how-to: Make a new Mass or Adaptive family…